1 4

RealRacingCraftsmen

RRC CONNECTOR OFFSET PLATE + DRIVER HYDRATION KIT BUNDLE

RRC CONNECTOR OFFSET PLATE + DRIVER HYDRATION KIT BUNDLE

€209,99 EUR
€209,99 EUR
Sale Sold out
Taxes included.

Both sides of the connection in one package. The Connector Offset Plate positions the connector exactly where your driver needs it on the roll cage. With the integrated connector housing you just add your radio plug and mount it. The Driver Hydration Kit handles everything on the driver side. Snap in, drink, snap out.

All RRC and SRC products use the same 4x7mm food-safe silicone tubing — everything in the system works with this tubing size.

Key Features

Complete Offset Connector Setup

  • Integrated connector housing, positions connector 18cm or 23cm from the roll cage
  • Driver Hydration Kit: standard driver side configuration
  • Press the button on the female fitting to disconnect: springs apart cleanly every time
  • Watertight on connect and disconnect: no drips even with a full line
  • 3/16" CPC dry break fittings throughout: same standard across the entire RRC and SRC system

Connector Offset Plate

  • Bottom half of connector housing built directly into the plate
  • Included orange top half bolts on
  • Spacers included for most radio plug sizes
  • 25cm total plate length: 18cm or 23cm offset from roll cage
  • 3M backed rubber padding on hose clamps
  • 2x hose clamps, bolts and mounting hardware included
  • ASA construction: heat resistant, UV stable, impact resistant

Driver Hydration Kit

  • ASA construction: heat resistant, UV stable, impact resistant
  • Ridged grip on both halves for secure handling even with gloves
  • Two bolt-together halves wedge the CPC fitting and radio plug securely in place
  • Spacers included for most radio plug sizes
  • 1m food-safe silicone tubing (4x7mm)
  • Bite valve: bite to drink, release to seal, watertight when not in use, hand wash only
  • 2x Velcro Tube Positioners with helmet sticky pads: genuine Velcro brand, pre-applied

Compatible Products

RRC DrinkBox — The heart of the system. Connect your offset plate tubing straight to the DrinkBox outlet.

RRC Full System Kit — The complete team hydration system.

Race Bottle — 950ml insulated bottle. Both caps included with every RRC Race Bottle.

RRC Endurance Bottle Dock — Mounts your Race Bottle in the car.

RRC Tubing — Same 4x7mm food-safe silicone with pre-installed insulation sleeves. Available in 2m or 4m.

Bite Valve — Replacement bite valves. Replace regularly for best hygiene.

One Way Spring Check Valve — Replacement check valves. Replace periodically for best performance.

Velcro Tube Positioner — Need extras? Available in 2 or 4 pack.

Care and Maintenance

Designed for low-maintenance, hassle-free use.

  • After every use: Flush the system with clean water for 20-30 seconds, then run briefly without liquid to clear excess moisture
  • After sugary drinks or isodrink: Always flush thoroughly with clean water immediately after use to prevent buildup
  • Regular cleaning: Fill your bottle with clean water and dissolve a cleaning tablet — run the full bottle through the system, then flush thoroughly with clean water and run dry
  • Deep clean (as needed): Use warm water with a bit of vinegar through the connector, then rinse thoroughly and run dry

Avoid alcohol-based cleaners — they may reduce the lifespan of the seals and fittings.

Exploring Sim Racing?

The SRC Driver + Car Side Bundle brings the same connector system to your sim rig — 4040 profile mounting instead of roll cage mounting. Find it at simracingcraftsmen.com

What's in the box?

Always included:

  • 1x RRC Connector Offset Plate (ASA, 25cm) with integrated connector bottom half
  • 1x Orange connector top half
  • Female 3/16" CPC fitting
  • Spacers for most radio plug sizes
  • Bolts and mounting hardware
  • 2x Hose clamps with 3M backed rubber padding
  • (With check valve option) 1x One Way Spring Check Valve

Per Driver Hydration Kit (1, 2 or 3x)

  • 1x Driver Connector Housing with Male 3/16" CPC fitting
  • Spacers for most radio plug sizes
  • 1m food-safe silicone tubing (4x7mm)
  • 1x Bite Valve
  • 2x Velcro Tube Positioners (ASA, genuine Velcro brand pre-applied)
  • 2x Helmet Sticky Pads
View full details