RealRacingCraftsmen
DRIVER HYDRATION KIT — Motorsport Driver Hydration Kit
DRIVER HYDRATION KIT — Motorsport Driver Hydration Kit
Couldn't load pickup availability
The complete driver side hydration setup. Everything you need on the driver side, ready to connect to any compatible car side CPC fitting.
The Driver Hydration Kit comes standard with a Male CPC connector, designed to pair with our Car Side Connector. Already have your own car side setup? The Driver Hydration Kit works with any compatible female 3/16" CPC fitting.
Available in single, 2 and 3 set options.
All RRC and SRC products use the same 4x7mm food-safe silicone tubing, everything in the system works with this tubing size.
Key Features
Driver Side Connector Housing
- ASA construction — heat resistant, UV stable, impact resistant
- Ridged grip on both halves for secure handling even with gloves
- Two bolt-together halves wedge the CPC fitting and radio plug securely in place
- Spacers included for most radio plug sizes — works with virtually any comms setup
- Standard Male 3/16" CPC fitting included
- Compatible with any female 3/16" CPC car side fitting
1m Food-Safe Silicone Tubing
- Same 4x7mm spec as the rest of the RRC and SRC system
- Connects driver connector to bite valve
- Cut to length if needed
Bite Valve
- Proven bite valve design — bite to drink, release to seal
- Watertight when not in use
- Hand wash only — protects the seals
- Replaceable
2x Velcro Tube Positioners
- ASA construction — proven in real motorsport use
- Velcro pre-applied to the spool — no assembly needed
- Rough side adhesive pad sticks inside your helmet
- Position anywhere along the tubing — reposition anytime without tools
- 2x helmet sticky pads included
Compatible Products
Compatible Products
Car Side Connector — The other half of the system. Female CPC as standard, pairs directly with the Driver Hydration Kit. Hose clamp mounting for roll cage installation.
RRC Driver + Car Side Bundle — Both sides together at a discount. Everything you need for the full connector setup.
RRC DrinkBox — The heart of the RRC system. Connect your Car Side Connector tubing straight to the DrinkBox outlet.
Race Bottle — 950ml insulated bottle. Both caps included with every RRC Race Bottle.
RRC Endurance Bottle Dock — Mounts your Race Bottle in the car. Integrated 3/16" CPC fitting connects directly to the DrinkBox inlet tubing.
RRC Tubing — Same 4x7mm food-safe silicone with pre-installed insulation sleeves. Available in 2m or 4m.
Bite Valve — Replacement bite valves. Replace regularly for best hygiene.
Velcro Tube Positioner — Need extras? Available in 2 or 4 pack.
One Way Spring Check Valve — Replacement check valves for the car side of the system.
Care and Maintenance
Care and Maintenance
- After every use: Flush the tubing with clean water for 20-30 seconds, then run briefly without liquid to clear excess moisture
- After sugary drinks or isodrink: Always flush thoroughly with clean water immediately after use to prevent buildup
- Regular cleaning: Dissolve a cleaning tablet in a full bottle of water — run through the system, flush with clean water and run dry
- Deep clean (as needed): Use warm water with a bit of vinegar, then rinse thoroughly and run dry
- Bite valve: Hand wash only — replace regularly for best hygiene
- Tubing: Replace periodically for best hygiene — see RRC Tubing
Avoid alcohol-based cleaners — they may reduce the lifespan of the tubing and seals.
Exploring Sim Racing?
Exploring Sim Racing?
The same Driver Hydration Kit is available at simracingcraftsmen.com — used by sim racers who want the full motorsport connector experience on their rig.
What's in the box?
What's in the box?
Per Driver Hydration Kit
- 1x Driver Connector Housing with 3/16" CPC fitting
- Spacers for most radio plug sizes
- 1m food-safe silicone tubing (4x7mm)
- 1x Bite Valve
- 2x Velcro Tube Positioners (ASA, velcro pre-applied)
- 1x Helmet Velcro Sticky Pad to be cut
Share
